+86-574-62523811,805
+86-29-85339281
loginjmachine@logge.com.cn
Blog
Home             Blog              Blog

What is an injection molding machine?

Sep 05.2019
What is an injection molding machine?
Injection molding machine is the main molding equipment for making thermoplastic or thermosetting plastics into plastic products of various shapes by using plastic molding molds.
 
How to work, the principle of work
The working principle of the injection molding machine: by means of the thrust of the screw (or plunger), the plasticized molten state (ie, the viscous flow state) of the plastic is injected into the closed cavity, and the process of obtaining the product after curing and setting is obtained. .
 
What is a hydraulic injection molding machine?
The hydraulic injection molding machine is an injection molding machine that controls the flow direction or flow of high-pressure hydraulic oil pumped from a hydraulic pump through a hydraulic valve to drive a hydraulic cylinder piston rod or a hydraulic motor to complete linear reciprocating or rotating motion.
 
What are the characteristics?
1Use a variety of clamping mechanism forms 2Injection forming range is large 3Price is lower 4Technology is mature and easy to maintain
Suitable for where to use, or what use
Suitable for a wide range of molding products, to meet the processing requirements of more products
 
What is an electric injection molding machine?
The all-electric injection molding machine refers to the various mechanisms of the injection device (ejection, metering, and table movement) and the various mechanisms of the mold clamping device (type opening, clamping, and product ejection) all rely on the servo motor. Drive.
 
What are the characteristics?
1 injection performance is stable. The dynamic technical parameters of the all-electric injection molding machine are basically free from external factors, and the mold forming parameters of the computer storage always conform to the actual molding conditions, so the injection performance is stable. Accurate response response to injection molding parameters.
2 energy saving. Energy saving is the biggest advantage of electric injection molding machines. Since the servo motor is directly driven according to the required force of each actuator, not only the efficiency is improved, but also the energy utilization rate is improved, and the energy utilization rate can reach 95% or more, so that the energy consumption of the full hydraulic injection molding machine is 25% to 60. %.
3 water. Since the all-electric injection molding machine does not use hydraulic oil, only the cooling water is required at the feeding port, so the cooling water usage can be reduced by 70% compared with the hydraulic injection molding machine that loads the sensitive pump; and the ordinary quantitative pump hydraulic injection molding machine Compared to cooling water can be reduced by 90%.
4 high efficiency. Since each actuator of the electric injection molding machine is driven by an independent servo motor and is not affected by the system, it can perform a compound action, can be simultaneously ejected during the mold opening process, and can be simultaneously clamped during the plasticizing process. , which greatly increases productivity.
5 optimize the working environment. Since the hydraulic fluid is not used, the working environment can be kept clean and the noise of the machine can be more than 10 dB lower than that of the full hydraulic injection molding machine. While optimizing the working environment, the injection molding machine's floor space was saved by 15% due to the cancellation of the hydraulic system.
 
Suitable for where to use, or what use
With the advantages of high speed, high efficiency and high precision, the all-electric injection molding machine is more suitable for processing high value-added products such as electronic, electrical, electrical, and high-clean medical products, especially for injection molding of small parts. Its high performance, high precision injection molding advantages.
 
What is a hybrid injection molding machine?
Hybrid injection molding machines generally refer to hybrid electric injection molding machines:
 
What are the characteristics?
1. Energy saving 2 High precision 3 Clean, low noise 4 Wide speed control range and good responsiveness
 
Suitable for where to use, or what use
It is especially suitable for small products and short injection strokes. It is very beneficial for the production of products with high cleanliness requirements. For some products with special requirements for cleanliness, such as medical supplies, it is inevitable to choose such models.
We are a famous injection molding machine manufacturer from China. Our injection molding machines are sold worldwide. Also your trusted manufacturer
0   Comments
Leave a Comment
Your email address will not be published. Required fields are marked *
Submit Comment
We are a professional enterprise of high-tech injection molding machines, with rich experience in injection molding machine manufacturing and sales.
Since LOG was officially listed in 2007, the company's sales network has spread all over the world.
Contact us today and we will customize an injection molding solution for you.
Conatct Us
Contact Information
Simen Industrial Zone, Yuyao City, Zhejiang Province, China
+86-574-62523811,805
Jack
+86 18605847957
+86 18605847957
113205952
Speak To One of Our Experts
Send Your Inquiry
*We respect your confidentiality and all information are protected.
Let’s Work on Your Next Plastic Injection Project.
© 2022 LOG Machine
Marketing Support by  Globalsir