What Is The Cost of The Plastic Injection Molding Machine?
Learning

What Is The Cost of The Plastic Injection Molding Machine?

LOG Machine

Many people want to figure out the cost of a plastic injection molding machine before investing or starting production. There is no doubt that this is very important. After all, investing in plastic injection molding machine is not a small expense. Choosing the right injection molding machine can save a lot of cost. So today we will discuss the cost of plastic injection molding machine and the factors that affect it.

The cost of a plastic injection molding machine varies greatly depending on the size of the machine required and the specific application. In fact, this question is similar to how much it costs you to buy a car. For example: do you want an SUV or a sedan; automatic or manual transmission; electric vehicles or gasoline vehicles; Volkswagen or Mercedes-Benz; and so on.

 

Different Grades of Injection Molding Machine Prices

We don’t talk too much nonsense, just let you know what you care about most. The cost of a general-purpose plastic injection molding machine of 80T-200T (which is the most common size in the world) may be in the following range:

  • Low-end 18,000-30,000 USD
  • Mid-range market $28,000-$60,000
  • High-end 75,000-250,000 USD

Special reminder, some special and large injection molding machines may exceed one million dollars.

Next, let’s discuss some big and detailed factors

 

The Main Factors Affecting the Cost of Plastic Injection Molding Machine

The cost of a plastic injection molding machine depends on size, manufacturer, design, age and parts and equipment. plastic injection molding machine has few key specifications to determine the cost of what you are really looking for.

Size

Generally speaking, the bigger the more expensive.

Clamping tonnage-this is a reference for the size of the machine, expressed by the tonnage of the force used to clamp the mold together during the production process. Can range from 10T (or even smaller) to 2500-3000T

Small models with a clamping force of about 100 tons are more affordable. If you can buy a car, you can buy an injection molding machine. In the range of more than 1,000 tons, in some places, you can have a comfortable house for the price. I will not give any exact figures here because the prices vary greatly.

Manufacturer

Research and development are mainly concentrated in international brands. Brands such as Arburg, Engel, Nissei, Husky and other brands have introduced new features, such as better clamping systems, platen design, barrel screw and injection with high-end motors and drives The system can increase the repeatability to 0.001g, which is very rare in ordinary commercial-grade machines. The costs associated with these are also considerable. Similarly, if you choose a Chinese brand, they will mass-produce products of sufficient quality, suitable for typical non-critical general-purpose applications used in the market, and are extremely cost-effective.

For example, compared with China's plastic injection molding machine for the same type of injection molding machine, the plastic injection molding machine of a Japanese manufacturer requires a much higher budget.

Design

Different types of injection molding machines may have a very large price gap, such as hydraulic injection molding machines, servo injection molding machines, and all-electric injection molding machines. Their price gaps are very large; high-speed injection molding machines, high-precision injection molding machines, or other special injection molding machines. There are also a lot of gaps in the price.

From pure hydraulic systems to variable displacement pumps, servo motors and full motors, there are many options to choose from. It is usually determined by the end use. For example, low capital expenditure investments in commercial household items such as buckets and cups will go to the cheapest hydraulic press. A better brand with deeper pockets would consider variable pump injection molding machines or servo injection molding machines to save power consumption during mass production. Medical companies that require clean room processes need all-electric settings.

Here I recommend you to make a horizontal comparison of the same type with multiple injection molding machine manufacturers, you can get a more intuitive understanding

Years

The second mobile phone will definitely have a price advantage. You can own cheaper second-hand machines. But there is no doubt that in real life, the benefits of a brand-new injection molding machine must be greater than that of a second-hand one. If you can't afford a decent new machine, it will be difficult for you to survive with the old machine, because spare parts bring a fortune, especially if you don't have a good mechanic.

Parts equipment

Parts and equipment will also directly affect the cost of plastic injection molding machine. Next, we will talk in detail about how parts affect injection molding machines.

 

Plastic Injection Molding Machine Parts Affect Cost

The more complex features, thin walls, and difficult-to-form features (undercuts, etc.) of plastic injection molding machine parts, the more complex and precise the mold. This pushes up costs.

Required tolerance

If the parts have some particularly strict tolerances, the mold will have to be "modified" to the specifications, which may be a time-consuming process and increase costs.

Allowable visual defect level

If your parts require smooth or specially textured surfaces, they will need to be polished or applied to molds after processing, which will also increase costs. The more areas you can allow for imperfect finishes, the lower the cost.

Where is the mold produced

Like anything else, labor costs are included in total costs. Mold factories like China usually produce almost the same molds at a much lower price than American mold factories.

The overall size of the part

The larger the mold, the more materials are needed, the longer the processing time, and the higher the price.

Number of parts required for production

Small parts produced in large quantities are usually molded in "multi-cavity" molds. Each time a single cavity mold is run, it will produce a part. Each time a multi-cavity mold is run, it can produce multiple parts, thereby reducing the cost of parts, but it will increase the complexity and cost of the mold. Although the part size is a factor relative to the molding capacity, it is mainly a balance between the cost of each part and the cost of the mold.

The material used to make the part

Certain materials have special requirements for heating, cooling, venting, and drawing (the angle on the mold makes the part easier to demold). The material that needs to be cooled means that a cooling line needs to be built in the mold, which increases the cost.

 

Our Suggestion

We have the following suggestions, I hope to help you.

Calculate operating costs

When you estimate the cost of plastic injection molding machine, you must consider the subsequent operating costs. Machines are only part of the equation; the others are tools, raw materials, equipment, and people. Once you underestimate one of them, your performance will be greatly reduced.

Different types of injection molding machines have completely different operation, maintenance, and additional costs. Compared to hydraulic injection molding machines, all-electric injection molding machines may be a better investment because you will run them uninterrupted.

You can click to read this article to understand the difference between an all-electric injection molding machine and a hydraulic injection molding machine.

More quantity, more discount

There is no doubt that the more you order, the higher the discount you will get. This is common sense.

Choose a Chinese plastic injection molding machine manufacturer

In my opinion, there is no perfect machine, but there are many substandard brands. I don’t believe that expensive brands are worth the money you pay for them, but I know that cheap brands tend to be worse in many ways. Therefore, we recommend that you choose Chinese high-quality brand injection molding machines, such as Haitian, Log Machine, and so on. These Chinese injection molding machine brands often rely on excellent quality and cheaper prices to gain a foothold in the market. And Chinese injection molding machine manufacturers are constantly developing towards high-end, which is a big trend.

Click to read the development trend of China injection molding machine.

 

The above are the factors that affect the cost of plastic injection molding machine and the suggestions we give you. I hope it will be helpful to you.

Welcome to visit our injection molding machine website:https://www.log-machine.com/

If you have any questions, you can contact us.

More articles recommended:

How to Choose Plastic Injection Molding Machine

Injection Molding Machine Maintenance: What You Need to Know

Variable Pump Injection Molding Machine: What You Need to Know

0 Comments
Leave a Comment
Your email address will not be published. Required fields are marked *
Submit Comment
Contact Us Now
Injection Molding Machine, China Injection Molding Machine, Plastic Injection Machine Manufacturer | Chuangji Injection Machine
Simen Industrial Zone, Yuyao City, Zhejiang Province, China
You can trust us
We are a professional Manufacturer in China, and we are constantly innovating so that our customers can have better products and services.
© 2020 CHUANGJI MACHINERY    RELATED ARTICLES    SiteMap.html    SiteMap.xml    Terms of Service      Privacy Policy
Marketing Support by Globalsir
Enter your inquiry details, We will reply you in 24 hours.
Name can't be empty
E-mail can't be empty
Company can't be empty
Phone can't be empty
Products can't be empty
Message can't be empty
Verification code error
code
Refill