AD 180T All-Electric Injection Molding Machine, China Injection Machine Manufacturer

Injection Molding Machine, China Injection Molding Machine, Plastic Injection Machine Manufacturer | Chuangji Injection Machine

Español

中文

Products > Anstrength All-Electric Machine > AD 180T All-Electric Injection Molding Machine

AD 180T All-Electric Injection Molding Machine

Order Now

AD 180T Technical Parameters

Model		AD185T
Clamping force	kN(tf)	1810(185)
Space between tie bar	mm*mm	560*510
Plate dimension	mm*mm	800*750
Opening Stroke	mm	450
Mold thickness	mm	200～500
Positioning ring	mm	120
Ejection force	kN(tf)	45(4.6)
Ejection Stroke	mm	120
Injection system
Screw diameter	mm	28	32	36	32	36	40	36	40	45	40	45	50
Shot weight(GPPS)	oz	3.01	3.96	5.01	4.34	5.46	6.76	5.46	6.76	8.89	6.76	8.89	10.57
Shot weight(GPPS)	g	86	113	143	124	156	193	156	193	254	193	254	302
Rubber melting speed	r/min	400			400			400			400
Injection distance	mm	140			160			160			160
Nozzle Protruding	mm	45			45			45			45
Nozzle contact force	kN	24			24			24			24
Injection unit		S175M			S219M			S263M			S307M
Injection speed	mm/s	400			400			300			300
Injection rate	cm³/s	246	322	407	322	407	502	305	377	477	377	477	589
Injection pressure	MPa	285	218	172	280	220	171	260	210	165	265	208	169
Holding pressure	MPa	227	174	137	224	176	136	205	166	130	212	166	135
Plasticization capacity	kg/h	37	53	76	53	76	101	76	101	136	101	136	193
Injection unit		S175S			S219S			S263M			S307S
Injection speed	mm/s	200			200			300			160
Injection rate	cm³/s	123	161	203	161	203	251	163	201	254	201	254	314
Injection pressure	MPa	285	218	172	280	220	171	260	210	165	265	208	1691
Holding pressure	MPa	227	174	137	224	176	136	205	166	130	212	166	135
Plasticization capacity	kg/h	37	53	76	53	76	101	76	101	136	101	136	193
Other
Machine Dimension	mmmmmm	560013002000			560013002000			560013002000			560013002000
Machine weight	T	6.4			6.5			6.7			6.8

Direct Drive Mechanism For Injection

Highly responsive and high speed injection control is achieved with direct-drive structure mechanism as the core of the injection

High response ,low inertia servo motor with corresponding low inertia load design to achieve the aim of the actual closed cycle and high acceleration.

Applied rotation mechanism for the injection unit,which is more convenient for disassembling screw components and effectively reduce the operation time.

Equipped with high-precision encoder and injection pressure sensor,which could control screw position with accuracy and stabilize rubber melting,injection .pressure holding and back pressure operation.

Content-rich standard configuration


Heat cover Adopt double-deck heat cover of stainless steel.Reduce energy consumption of heating system. Avoid operator be scalded due to mishandling.	Injection safety protector Reasonable design which avoids operator being scalded due to mishandling and facilitates operation,greatly improves work efficiency.	Material clean-up plate Configured stainless steel cleaning plate under the nozzle to facilitate waste removal,avoiding waste being left on the gap of machine while clean-up operation Less troubled during maintenance.


Chute type erecting bed for hopper Humanized design .easily installed; Adopts high-quality steel.stronger and make it more durable ,safely and reliably to use.	Color touch display 15 inch HD color touch display , its clear image makes it handy to operate, rotatable design which is more convenient for technical operation.	Three-color alarm light When emergency occurs,the device will remind you what kind of situation by different colors ,you can cope with urgent situations more easily,greatly increase the production management efficiency.

Injection speed controlled

Applied low inertia load design which could strengthen basic characteristics of injection speed responsiveness and low speed injection traceability.

Optimized plate design

Stress concentration plate design unifies clamping force of the mold bears.improving the issues of inadequate venting and nonuniform of pressure on mold surface.what occurs on traditional toggle machines,significantly increasing the mold service life.


Direct-drive closing mold Direct drive mechanism,quick response for opening and closing mold.excellent protection for low pressure.	High standard clamping unit High standard clamping force and parallelism adjustment are achieved with stable clamping state and reduced mold losses.	Support plate High wear resistance and low friction of the movable plate supports sliding block, extends mold service life.	Full-automatic lubricating device Reduce cost of maintenance。


Fixed plate structure Optimized fixed plate structure. reduces the tilting deforming of plate	Stress concentration moving plate Optimized moving plate structure, significantly improving the precision of locking face.	Machinery safety bar Reliable machinery safety bar.	Frame High strength frame design and adopt thick wall structure stesl components, reducing the vibration of fast opening and closing.

In Response To Diversified Plastics

With requirement of higher heat resistance for high-precision molded parts and the advent of plastics products that can substitute metal parts.the performance requirements of the molded products are increaing.Depending on the characteristics of the resins,from PO with long molding cycle to PC for optical lenses and ABS for structural parts.specially designed and developed screws by Anstrength based on factors such as resin heating temperature and injection speed may be used.together with specialized screw components with special material.special processing and special treatment.

Screw Options Of Various Types

Diversified Products

We would love to know what you need.

We will not disclose your information, and contact you within 24 hours.

Name

Email*

Country

Phone

Products you want

Submit

Refill